CuattroDR
Most experts said that surpassing the image quality and speed of our wired 14”x17” detector in a wireless version might be impossible. Cuattro engineers disagreed... so they went ahead and did it. Introducing the Cuattro 14”x17” wireless, cassette-sized detector. Not satisfied with wireless for wireless sake, every aspect of this detector has been improved. It is light and agile. The wireless form factor makes patients and users safer while allowing for a portable workflow. Automatic Exposure Detection (AED) and Auto Synchronization Modes allow for simple installation in minutes, without the need to "synchronize" or "re-wire" generators and mechanics. Light-weight, super-thin, and cassette sized housing guarantees ease of use for insertion into existing tables, wall-stands, and Bucky systems. Best of all, the new Cuattro 14”x17” wireless detector is crafted from the ground up to work natively with Cuattro's industry leading multi-frequency image tuning and multi-touch acquisition software. The results are as clear as the images. Better. Much better.
  • Features:
  • Automatic Exposure Detection (AED) and Auto Synchronization Modes
  • Completely wireless operation with the fastest data transfer rates
  • Optimized fit in a bracket or bucky - same size as film/CR cassettes
  • Super-stable wireless connection with working distances over 100’
  • Faster image transfer than wired detectors
  • Three batteries included with triple charger
  • Over 150 consecutive images per battery charge
  • 4 hours of run time at 21˚C (75˚F)
  • 2 hour charge time per battery (from empty)
  • On-board storage for up to 100 images
14x17" Wireless Detector
  • Sensor:
  • Panel: Single substrate amorphous silicon active TFT/diode array
  • Scintillator: Direct deposition CsI:Tl
  • Pixel Matrix: 3556 × 4320
  • Pixel Pitch: 100 μm
  • Electronics:
  • Amplifiers: Low noise ASICs with user selectable gains
  • ADC: 16 bit
  • Image Transfer Time: Wired: 500 ms; Wireless: 3000 ms
  • On Board Memory: 1 GB DDR3, 4 GB SDHC card
  • Mechanical:
  • Size: ISO 4090 for 35 cm × 43 cm (14” × 17”) cassette size
  • Active Area: True 355 mm × 432 mm
  • External Dimensions: 384 mm (w) × 460 mm (l) × 15 mm (h)
  • Weight: 3.8 kg (8.4 lbs)
  • Housing: Carbon-fiber front & back
  • Communications:
  • Status Display: OLED display with WiFi, battery, and sensor indicators
  • Wireless Data I/F: 802.11n WiFi standard
  • Wired Data I/F: GigE via optional power & communication tether
  • X-ray I/F: Integrated X-ray trigger control. Automatic Exposure Detection
  • Imaging Performance:
  • Limiting Resolution: 5 cy/mm
  • Typical MTF: 70% (1 cy/mm), 40% (2 cy/mm), 15% (4 cy/mm) for RQA5
  • Typical DQE: 75% (0 cy/mm), 60% (1 cy/mm), 40% (3 cy/mm) for RQA5
  • Environmental:
  • Temperature: 10 – 35 °C operating
  • Humidity: 30 – 70 % RH operating (non-condensing)
  • Power:
  • Battery: Rechargeable battery, 53.3 Wh
  • Battery Charger: External two bay charger 100-240 V AC 50/60 Hz
  • Interface & Power Unit: Optional XRpad IPU with external power supply - 100-240 V AC, GigE, and X-ray I/F
CuattroDR 1717 Detector
© 2007 Cuattro Medical. All rights reserved. Patents pending.